iNode MCU GSM - Bluetooth/WiFi/GSM gateway - ESP32

The iNode MCU GSM device is based on the ESP32 chip and programmed in the microPython language. GSM MCU has no specific functionality, it can, for example, periodically send data in binary format from Bluetooth sensors to the indicated HTTP server. The module can be freely programmed in the microPython language based on Python 3.4. Scripts are uploaded to the device via the iNodePy application that works with Windows, Android and Linux devices, in the Chrome or Edge browser environment. It is equipped with over 2 MB of RAM, approx. 4.7 MB of internal memory and such wireless communication interfaces as Bluetooth 4.1, WiFi and GSM . The device is also equipped with a hardware watchdog. The device has a slot for nano SIM cards and two antenna connectors for Bluetooth and GSM. The module is powered via the microUSB port ( 5 V / 1 A) . The kit also includes two SMA antennas.

iNode MCU GSM - Bluetooth / WiFi / GSM gateway - ESP32.

The module is based on the ESP32 chip programmed in microPython using the iNodePY application. INode devices can be monitored using theiNode MQTT Monitor tool. The applications work with Android, Linux and Windows systems via the Google Chrome or Edge browser. You can find a free microPython script on the iNode support site. You must log in to the website as an inode user, without a password.

• Communication with BLE devices
• Alarm systems, property protection
• Patient monitoring
• Caring for the elderly
• Home automation

• Radio parameters:
  • RX / TX:
    • Bluetooth / BLE: from 2402 to 2480 MHz, sensitivity - 30.8% PER: -97 dBm
    • WiFi: 2412 to 2472 MHz / 2422 to 2462 MHz
  • Output power (max.):
    • Bluetooth: 6.72 dBm
    • BLE: 8.23 dBm
    • WiFi: 16.81 dBm
  • Modulation:
    • Bluetooth: GFSK, π / 4-DQPSK, 8DPSK
    • BLE: GFSK
    • WiFi: DSSS, 0FDM
  • Antenna:
    • external SMA type RP-SMA male, 2.4 GHz 3 dBi
• GSM / GPRS modem:
  • Fibocom G510 GPRS meeting the requirements of Annexes 1 and 3 of Directive 2014/53 / EU, which is used in accordance with its intended use and manufacturer's instructions:
    • Quad Band 900/1800 MHz 850/1900 MHz
    • Multi-slot class 12 (4 DL slots, 4 UL slots), Max BR DL / UL 85.6 kB / s, Coding Scheme CS1-CS4, Class B
• Radio parameters:
  • SMA type female
  • Recommended antenna parameters:
    • frequency: Quad Band 850/900/1800/1900 MHz
    • gain: 0 dBi but not more than 2.5 dBi
    • impedance: 50 ohms
    • VSWR: 1.5: 1; at worst 2.5: 1
• GSM antenna connector:
  • SMA type female
  • Recommended antenna parameters:
    • frequency: Quad Band 850/900/1900/1900 MHz
    • gain: 0 dBi but not more than 2.5 dBi
    • impedance: 50 ohms
    • VSWR: 1.5: 1; in the worst case 2.5: 1
• Work parameters:
  • Configurable from PC via Bluetooth:
    • WiFi network name and password
    • Python scripts controlling the operation of the device
    • MicroPython firmware replacement via OTA (WiFi or GSM)
• Power supply:
  • MicroUSB socket for connecting an external power supply (not included), not stabilized, 230 V 50 Hz AC, 5 V / 1000 mA with double or reinforced insulation
  • Maximum cable length: 3 m
• Case:
  • Metal
  • Dimensions: 62 x 38 x 22 mm
• The remaining:
  • Modem and script operation status LEDs signaling
  • Nano SIM card connector
  • Flash memory for Python scripts: approx. 4.7 MB
  • RAM memory: approx. 2 MB
  • Working temperature: -30 ° C to 65 ° C
  • Humidity: 35% to 90% RHG
  • Weight: 50 g

• iNode MCU GSM - Bluetooth / WiFi / GSM gateway - ESP32
• Bluetooth RP SMA male antenna
• GSM antenna SMA female

• iNodePY
• iNode MQTT Monitor
• ESP32
• Instruction
• Technical support service